Handled Bowl

Description

SB111 Handled Bowl in ready to paint, Soft-Fired, Cone 04, Stoneware Bisque. 

 8 W x 4 H x 6 D

This item is unpainted.

You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery

Hand Glazed Bowl Combo

Products Used

Bisque

• SB-111 Handled Bowl

Color

• SW-106 Alabaster
• SW-125 Purple Mint
• SW-127 Olivine
• SW-128 Cordovan

Decorating Accessories

• CB-604 #4 Soft Fan
• BT-910 Synthetic Sponges

Additional Materials

• Pencil
• Slip Trailer (Xiem Studio Tools)

1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
2. Load a slip trailer with SW-128 Cordovan.
3. On the inside edge of the bowl, make fat inverted loops with a slip trailer, two rows, it will be necessary to rest the bowl on an angle so the loop will keep its shape till the glaze is set. Apply 2 coats. Allow to dry
4. Using a CB-604 #4 Soft Fan, apply 2 coats of SW-127 Olivine to the entire piece. Allow for your glaze to fully dry in between each coat.
5. When the glaze is dry, apply 2 coats of SW-106 Alabaster to the entire piece. Recede the second coat on the outside of the bowl.
6. After applying the 2nd coat of SW-106, and while the glaze is still wet, apply 1 coat of SW-125 Purple Mint to the entire piece. Recede from the bottom of the bowl for this coat.
7. With a damp sponge, wipe off any excess glaze off the foot of bowl.
8. Place un-stilted, on a high-fired, kiln washed kiln shelf.
9. Fire to shelf cone 5/6.